TUP-A2.3P: Metamaterials for Microwave Applications: Lenses, Sensors and Guided-Wave Structures |
| Session Type: Interactive Forum |
| Poster Time: Tuesday, June 28, 14:40 - 16:40 |
| Presentation Time: Tuesday, June 28, 14:40 - 15:40 |
| Starts on Board: PF.1 |
| Location: Poster Area F |
| Session Chair: Giacomo Oliveri, University of Trento
|
| |
|
| TUP-A2.3P.1: TRANSFORMATION OPTICS-INSPIRED DISPERSION-CORRECTED GRADIENT-INDEX LENS DESIGN |
| Donovan Brocker, Sawyer D. Campbell, Jogender Nagar, Douglas Werner, The Pennsylvania State University, United States |
| |
|
| TUP-A2.3P.2: AN ANALYTICAL DESIGN METHODOLOGY FOR DISPERSION-CORRECTED METAMATERIAL LENSES |
| Donovan Brocker, Sawyer D. Campbell, Douglas Werner, Pingjuan Werner, The Pennsylvania State University, United States |
| |
|
| TUP-A2.3P.3: TRIMMED DOE LENS AND GAIN ENHANCEMENT |
| Rounak Singh Narde, Jayanti Venkataraman, Zhaolin Lu, Rochester Institute of Technology, United States |
| |
|
| TUP-A2.3P.4: ULTRASENSITIVE MICROWAVE NEAR-FIELD BASED SENSORS FOR CRACK DETECTION IN METALLIC MATERIALS |
| Ali Albishi, Omar Ramahi, University of Waterloo, Canada |
| |
|
| TUP-A2.3P.5: OPTIMIZING SWEEPING FREQUENCIES OF MICROWAVE SENSORS USING INTELLIGENT FEATURE SELECTION |
| Abdulbaset Ali, Omar Ramahi, University of Waterloo, Canada; Abdelisr Mooman, University of Rochester, United States |
| |
|
| CANCELED TUP-A2.3P.6: DESIGN AND OPTIMIZATION OF A BLOCH-SURFACE-WAVE-BASED SENSING PLATFORM FOR LAB-ON-FIBER TECHNOLOGY |
| Michele Scaravilli, Giuseppe Castaldi, Andrea Cusano, Vincenzo Galdi, University of Sannio, Italy |
| |
|
| TUP-A2.3P.7: UHF LUMPED ELEMENT MODEL OF A FULLY-INKJET-PRINTED SINGLE-WALL-CARBON-NANOTUBE-BASED INTER-DIGITATED ELECTRODES BREATH SENSOR |
| Jimmy G.D. Hester, Manos M. Tentzeris, Yunnan Fang, Georgia Institute of Technology, United States |
| |
|
| TUP-A2.3P.8: EFFECT OF GEOMETRY MODULATION ON THE FULL DISPERSION DIAGRAM OF A 2D PERIODIC STRUCTURE BUILT IN STRIPLINE TECHNOLOGY |
| Ladislau Matekovits, Politecnico di Torino, Italy; Aldo De Sabata, Politehnica University Timisoara, Romania; Ovidiu Lipan, University of Richmond, United States; Andrei Silaghi, Silviu Baderca, Adrian Buta, Politehnica University Timisoara, Romania |
| |
|
| TUP-A2.3P.9: REFLECTION PHASE AND SURFACE WAVE PROPAGATION CHARACTERISTICS OF A SYMMETRICAL PERFORATED HIGH IMPEDANCE SURFACE |
| Saud M. Saeed, Constantine A. Balanis, Arizona State University, United States; Ahmet C. Durgun, Intel Corporation, United States |
| |
|
| TUP-A2.3P.10: NONRECIPROCAL GUIDED WAVE PROPAGATION CHARACTERISTICS OF A THICK METAL STRIP PERIODICALLY LOADED FERRITE SLAB WAVEGUIDE |
| Kazuo Nishimura, Ryukoku University, Japan |
| |
|
| TUP-A2.3P.11: EMPLOYING SELF-COLLIMATION PHENOMENA IN PHOTONIC CRYSTALS FOR THE INVISIBILITY CLOAK DEVELOPMENT |
| Navid Pourramzan Gandji, Elena Semouchkina, Michigan Technological University, United States |
| |
|
| TUP-A2.3P.12: APPLICATION OF THE QCTO TECHNIQUE TO DESIGN FLAT FRESNEL GRIN LENSES |
| Xiande Wang, Douglas Werner, The Pennsylvania State University, United States |
| |
|
| TUP-A2.3P.13: BAND-PASS UNIT CELL FOR EXTENDED LOW-PROFILE LENS OVER RADIALLY-CORRUGATED CIRCULAR HORN |
| Hon Ching Moy-Li, Miguel Ferrando-Bataller, Daniel Sánchez-Escuderos, Mariano Baquero-Escudero, Universitat Politècnica de València, Spain |
| |
|
| TUP-A2.3P.14: PERFORMANCE METRICS ENHANCEMENT OF PATCH ANTENNAS WITH META-MATERIAL LENS INCORPORATION |
| Amol Baviskar, Vishwatmak Om Gurudev College of Engineering (VOGCOE), Shahpur, Thane, India; Afshan Mulla, University Of Maryland, College Park, India; Jaypal Jagdish Baviskar, Shivraj Rathod, Veermata Jijabai Technological Institute (VJTI), India |
| |
